Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 242

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 492
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 241
6. Command Reference
218
Example
The following example shows how to display the format of the
offline
operation:
>dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber
[-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -hbaportwwn HBA_Port_WWN
[-tid Target_ID -hlun Host_LUN] [-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
Host_LUN { 0000 - FFFF }(Hexadecimal)
KAPL01001-I The HDLM command completed normally.
Operation name = offline, completion time = yyyy/mm/dd
hh:mm:ss
>
Reference
Using the view operation together with Windows commands enables you to filter the
path information listed for a specific HBA port or channel adapter port. For details
about the
view operation, see 6.7 view (Displays Information).
We recommend that you use the following command and verify the information on the
target paths before you execute the
offline operation to place offline all the paths
connected to a specific HBA port or channel adapter port.
Example 1
The following example shows how to filter and display the information on all
paths that pass through the HBA port whose host port number is
0004 and bus
number is
0001:
>dlnkmgr view -path | find "0004.0001"
The above command will display information on all the paths that pass through
the specified HBA port.
Example 2
The following example shows how to filter and display the information on all the
paths that pass through the channel adapter port
0A of the Thunder 9500V Series:
>dlnkmgr view -path -stname | find "9500V" | find "0A"
Vista de pagina 241
1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 491 492

Comentarios a estos manuales

Sin comentarios