
6. Command Reference
266
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the
-path
-item
parameter.
#2
In a cluster configuration, an
offline operation requested during reserve
processing is put into the waiting-to-execute state, and does not execute until the
reserve processing finishes.
DNum
#1
- When Dev indicates an entire LU, 0 is displayed.
HDevName
#1
#3
- Host device name.
A drive letter is displayed. If no drive letter has been assigned, a hyphen (
-) is
displayed.
The drive letter is displayed in the
HDevName field even if the value of the DNum
field is 0. Note, however, that the displayed drive letter is the drive letter for one
of the Devs included in the LU.
IEP
#1
- Information about the intermittent error.
This item is displayed only when you specify
-iem with the -path parameter.
One of the following values is displayed for each path:
• -
Indicates that intermittent error monitoring is disabled or the monitoring time
for an intermittent error is out of range (the path status is
Online(E) or
Offline(E)).
• A value of at least 0
Indicates the number of errors that occurred during intermittent error
monitoring (the path status is
Online(E), Offline(E), or Online).
•
*
Indicates that an intermittent error occurred (automatic failbacks do not check the
path) (the path status is
Online, Online(E), or Offline(C)).
HBAPortWW
N
#1
- A 16-digit hexadecimal number indicating the WWN information for an HBA
connected to the storage system.
This item is displayed only when you specify
-hbaportwwn together with the
-path parameter.
Note that a hyphen (
-) is displayed in the following cases:
• When using the EMC DMX, EMC CX, or HP EVA series
• When using iSCSI interfaces
Displayed Item Description
No
summary
displayed
Summary
displayed
Comentarios a estos manuales