Hp StorageWorks XP10000 Disk Array Manual de usuario descargar pdf (Pagina 167)

Second Error Check

In the second che

ck, the spreadsheet settings are veriﬁed. Any errors found are displayed on the Error

Information li

st. This second check is performed before the Apply button becomes available. Figure 119

shows the ﬂow of

the second check.

The second error check consists of two different types of the checks. These checks are shown in Figure 119

as the Level 1 and Level 2. The Level 2 check is performed only when no error is found by the Level 1

check. Each level of the check of the second error check detects the following errors:

• Level 1 check (

the format and parameters are checked):

• A function tag is not supported.

• A setting value is incorrect or omitted.

•The setting r

ange is incorrect. The correct ranges are as follows:

CU: 00 - 3F

LDEV: 00 - FF

LUN: 0000 - 03

Group ID: 00 - FE

Host Mode: 00 - 2F

• Level 2 check

The current settings are compared to the imported settings and checked for logical consistency. Note

that certain errors can only be detected by the third check.

When you impo

rt a spreadsheet with no errors detected, the pane displays Ready above the error

information list, and the Apply button becomes available.

HP StorageWorks

167

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 177 178

Sin comentarios

Hp StorageWorks XP10000 Disk Array Manual de usuario Pagina 167