HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 126)

CAUTION: Pushing the CMOS button will reset CMOS values to factory defaults. It is important to back

up the computer CMOS settings before resetting them in case they are needed later. Back up is easily

done through Computer Setup. See Computer Setup (F10) Utility on page 63 for information on backing

up the CMOS settings.

4. Locate, press, and hold the CMOS button in for ve seconds.

NOTE: Make sure you have disconnected the AC power cord from the wall outlet. The CMOS button will

not clear CMOS if the power cord is connected.

NOTE: For assistance locating the CMOS button and other system board components, see the system

board components image at System board on page 60.

5. Replace the access panel.

6. Reconnect the external devices.

7. Plug in the computer and turn on power.

NOTE: You will receive POST error messages after clearing CMOS and rebooting advising you that

conguration changes have occurred. Use Computer Setup to reset any special system setups along with

the date and time.

For instructions on Computer Setup, see Computer Setup (F10) Utility on page 63.

116 Chapter 8 Password security and resetting CMOS

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 152 153

Sin comentarios

HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario Pagina 126