HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 31)

Front bezel security

The front bezel can be locked in place by installing a security screw provided by HP. To install the security

screw:

1. Prepare the computer for disassembly (Preparation for disassembly on page 19).

2. Remove the access panel (Access panel on page 20).

3. If you do not have a 6-32 standard screw, remove one of the four silver 6-32 standard screws located on

top of the drive cage. Refer to Installing and Removing Drives on page 32 for an illustration of the 6-32

standard screw locations.

4. Install the 6-32 security screw through the middle front bezel release tab to secure the front bezel in

place.

5. Replace the computer access panel.

6. If the computer was on a stand, replace the stand.

7. Reconnect the power cord and any external devices, and then turn on the computer.

8. Lock any security devices that were disengaged when the access panel was removed.

Front bezel security 21

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 152 153

Sin comentarios

HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario Pagina 31