HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 46)

7. Replace the front bezel if it was removed.

8. Replace the computer access panel.

9. If the computer was on a stand, replace the stand.

10. Reconnect the power cord and any external devices, and then turn on the computer.

11. Lock any security devices that were disengaged when the access panel was removed.

Removing and replacing a primary 3.5-inch hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you

can transfer the data to the new hard drive.

1. Prepare the computer for disassembly (Preparation for disassembly on page 19).

2. Remove the access panel (Access panel on page 20).

3. Disconnect the power cable (1) and data cable (2) from the back of the hard drive.

36 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 152 153

Sin comentarios

HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario Pagina 46