HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 153
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
CAUTION: Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly
seat the fan sink on the processor to avoid damage that could require replacing the system board.
Failure to install the bae may cause the computer to overheat.
Processor
Description
AMD A10-8850B, 3.9 GHz
AMD A10-8750B, 3.6 GHz
AMD A10-7800B, 3.57 GHz
AMD A8-8650B, 3.2 GHz
AMD A8-7600B, 3.1 GHz
AMD A6-8550B, 3.7 GHz
AMD A6-8350B, 3.5 GHz
AMD A4-7300B, 3.8 GHz
1. Prepare the computer for disassembly (Preparation for disassembly on page 19).
2. Remove the access panel (Access panel on page 20).
3. Rotate the drive cage to its upright position.
4. Rotate the small bae into the upright position (Small bae on page 47).
5. Remove the fan bae (Fan bae on page 48).
6. Remove the heat sink (Fan sink on page 55).
7. Rotate the locking lever to its full open position (1).
56 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 152 153

Comentarios a estos manuales

Sin comentarios