HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 42)

Drive positions

1 9.5mm slim optical drive bay

2 3.5-inch primary hard drive bay

3 3.5-inch secondary hard drive bay

4 2.5-inch hard drive bay

NOTE: The drive conguration on your computer may be dierent than the drive

conguration shown above.

To verify the type and size of the storage devices installed in the computer, run Computer Setup.

Installing and Removing Drives

When installing drives, follow these guidelines:

●

The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on

the system board labeled SATA0.

●

Connect secondary hard drives and optical drives to one of the light blue SATA connectors on the system

board (labeled SATA1 and SATA2).

32 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 152 153

Sin comentarios

HP EliteDesk 705 G2 Base Model Small Form Factor PC Manual de usuario Pagina 42