HP ElitePad 1000 G2 Tablet Manual de usuario descargar pdf (Pagina 32)

WWAN module

Description Spare part number

HP lt4226 LTE/HSPA+ Gobi 4G Module 736675-005

Before removing the WWAN module, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19).

Remove the WWAN module:

1. Release the grounding tape (1) that secures the WWAN module to the system board.

2. Disconnect the WWAN antenna cables (2) from the terminals on the WWAN module.

NOTE: The WWAN antenna cable labeled “5” connects to the WWAN module “MAIN” terminal labeled

“5”. The WWAN antenna cable labeled “6” connects to the WWAN module “AUX/GPS” terminal labeled

“6”.

3. Remove the Phillips PM1.3×1.5 broad head screw (3) that secures the WWAN module to the

bottom cover.

26 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 72 73

Sin comentarios

HP ElitePad 1000 G2 Tablet Manual de usuario Pagina 32