HP ElitePad 1000 G2 Tablet Manual de usuario descargar pdf (Pagina 57)

Speakers

Description Spare part number

Speakers (include left and right speakers and cables) 747629-001

Before removing the speakers, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19), and then remove the

following components:

a. WWAN module (see

WWAN module on page 26)

b. Power button board (see

Power button board on page 32)

c. Battery (see

Battery on page 39)

d. System board (see

System board on page 40)

e. Docking connector cable (see

Docking connector cable on page 46)

Remove the speakers:

1. Release the tabs (1) built into the bottom cover that secure the speaker cable, and then release the

speaker cable.

2. Remove the four Phillips PM1.3×2.0 screws (2) that secure the speakers to the bottom cover.

Tablet component replacement procedures 51

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 72 73

Sin comentarios

HP ElitePad 1000 G2 Tablet Manual de usuario Pagina 57