HP ElitePad 1000 G2 Tablet Manual de usuario descargar pdf (Pagina 54)

7. Remove the docking connector cable (3).

Reverse this procedure to install the docking connector cable.

WLAN antenna

NOTE: The WLAN antenna are included in the Antenna Kit and include the WLAN antenna main and auxiliary

cables and transceivers.

Description Spare part number

Antenna Kit for use in European countries and regions, North America, and Latin America 799297-001

Before removing the WLAN antenna, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19), and then remove the

following components:

a. WWAN module (see

WWAN module on page 26)

b. Power button board (see

Power button board on page 32)

c. Battery (see

Battery on page 39)

d. System board (see

System board on page 40)

Remove the WLAN antenna:

1. Release the WLAN antenna cables from the routing channel (1) built into the bottom cover.

2. Detach the WLAN antenna transceivers (2) from the bottom cover.

48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 72 73

Sin comentarios

HP ElitePad 1000 G2 Tablet Manual de usuario Pagina 54