HP ElitePad 1000 G2 Tablet Manual de usuario descargar pdf (Pagina 45)

Battery

Description Spare part number

2-cell, 30-Wh, 4.0-Ah, Li-ion battery (includes battery cable) 728558-005

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19).

5. Remove the power button board (see

Power button board on page 32).

Remove the battery:

1. Release the volume button board cable from the retention clips (1) built into the battery.

2. Release the tab (2) built into the bottom cover that secures the WWAN/GPS antenna cables, and then

release the antenna cables (3).

3. Detach the WWAN/GPS main transceiver (4) from the bottom cover. (The WWAN/GPS main transceiver is

attached to the bottom cover with double-sided adhesive.)

4. Remove the six Phillips PM1.3×2.0 screws (5) that secure the battery to the bottom cover.

5. Remove the battery (6).

Tablet component replacement procedures 39

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 72 73

Sin comentarios

HP ElitePad 1000 G2 Tablet Manual de usuario Pagina 45