HP ElitePad 1000 G2 Tablet Manual de usuario descargar pdf (Pagina 38)

Power button board

Description Spare part number

For use only on computer models equipped with the Windows 8 Professional operating system 753976-601

For use only on computer models equipped with the Windows 8 Standard operating system 753976-501

Does not include operating system 753976-001

Before removing the power button board, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19).

5. Disconnect the left microphone cable from the power button board (see

Microphones on page 30).

6. Disconnect the rear-facing webcam cable from the power button board (see

Rear-facing webcam

on page 31).

Remove the power button board:

1. Disconnect the volume button board cable (1) from the power button board.

2. Release the support strip (2) that secures the WWAN antenna transceiver to the battery.

3. Release the support strip (3) that secures the power button board cable to the system board.

4. Release the ZIF connector (4) to which the power button board cable is attached, and then disconnect

the power button board cable from the system board.

5. Detach the power button board cable (5) from the surface of the battery. (The power button board cable

is attached to the battery with double-sided adhesive.)

6. Remove the Phillips PM1.3×2.0 broad head screw (1) and the Phillips PM1.3×2.0 screw (2) that secure

the power button board to the bottom cover.

32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 72 73

Sin comentarios

HP ElitePad 1000 G2 Tablet Manual de usuario Pagina 38