HP ElitePad 900 G1 Base Model Tablet Manual de usuario

Technical white paper Installing Microsoft Windows 8 on HP ElitePad 900 G1 Tablet Commercial Managed IT Table of contents Executive summary ...

10 Using the Control Panel to enable .NET Framework 3.5 To enable .NET Framework 3.5 via the Control Panel, select Control PanelPrograms and Feature

, Sign up for updates hp.com/go/getupdated Share with colleagues Rate this document © Copyright 2013 Hewlett-Packard Development Company

2 Executive summary This white paper provides instructions for installing 32-bit versions of the Microsoft® Windows® 8 operating system along with ap

, 3 4. When prompted, select USB Hard Drive as the boot device. Note For USB disk on key (DOK) installation, a bootable DOK with WinPE 4.0 32-bit

4 Drivers and enhancements Table 1 lists the minimum version for each HP driver and enhancement required for Windows 8 when running on the HP ElitePa

, 5 Appendix A: Using HP SoftPaq Download Manager Perform the following procedure to use HP SoftPaq Download Manager to update your current platfor

6 6. Select the desired SoftPaqs from the Available SoftPaqs list, shown in Figure A-2. Figure A-2. Available SoftPaqs list 7. Select the desired

, 7 Appendix B: Installing preboot applications and tools The HP_TOOLS partition and the preboot applications on this partition are not required for

8 Appendix C: Q & A Q: Are my accessories compatible with Windows 8? A: Software and hardware compatibility can be checked at the Compatibility C

, 9 Appendix D: Installing .NET Framework 3.5 on Windows 8 .NET Framework 4.5 is included with Windows 8 and installed on your computer with the ope