HP JetAdvantage Security Manager 10 Device E-LTU Manual de usuario descargar pdf (Pagina 51)

 Server Name - IP address of the Syslog Server. If set via BOOTP then SNMP set will fail. If not

set via BOOTP then SNMP set will succeed. Value saved across warm boot power cycles.

BOOTP will always overwrite SNMP set values.

 Communication Protocol - Protocol used by SysLog server for communication. Default set to

UDP. Choices include TCP or UDP.

 Server Port - Syslog Server Port. Default set to port number 514. Possible values include 1..

65535

 Maximum Messages per Minute - Maximum number of syslog packets to be sent per minute.

0 = Disabled. Possible values include 0..1000

 Priority - Priority below which the syslog messages will not be sent. Valid priority levels = 0

through 7. Disabled = 8.

 Logging Facility - The syslog facility is used to separate out log messages by application or by

function.

Control Panel

Assess various control panel settings such as control panel lock, control panel timeout, and whether to

display the job status.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 115 116

Sin comentarios

HP JetAdvantage Security Manager 10 Device E-LTU Manual de usuario Pagina 51