Hp ProLiant DL120 G7 Server Manual de usuario descargar pdf (Pagina 30)

Hardware options installation 30

Memory configuration

To optimize server availability, the server supports ECC memory. ECC memory provides the greatest memory

capacity for a given DIMM size, while providing single-bit memory error corrections, depending on the

specific DIMM type. This mode is the default option for this server.

For the latest memory configuration information, see the QuickSpecs on the HP website

(http://www.hp.com).

ECC memory configuration

ECC memory is the default memory protection mode for this server. Standard ECC can correct single-bit

memory errors and detect multi-bit memory errors. When multi-bit errors are detected by using Standard

ECC, the error is sent to the server and causes the server to halt.

General DIMM slot population guidelines

• The server has four memory slots.

• The server supports two channels with two UDIMM slots per channel.

• Memory channel A consists of the two UDIMMs that are closest to the processor.

• Memory channel B consists of the two UDIMMs that are located farthest from the processor.

• Different types of processors have different types of memory support.

• The server supports dual-rank, 1,333 MT/s ECC UDIMMs.

• The server supports up to 32 GB (4x8-GB) for UDIMMs.

• The server does not support:

o LV-DIMMs

o RDIMMs

o Non-ECC UDIMMs

• When installing DIMMs:

o If the processor is not installed, then do not install DIMMs.

o Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank).

o Use HP-qualified UDIMMs.

o The DIMM farthest from the processor (either CHA or CHB) must be populated first.

Installing a DIMM

1. Power down the server (on page 17).

2. Remove the access panel (on page 18).

3. Remove the air baffle (on page 19).

4. Open the DIMM slot latches.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 104 105

Sin comentarios

Hp ProLiant DL120 G7 Server Manual de usuario Pagina 30