Hp ProLiant DL120 G7 Server Manual de usuario Pagina 56
- Pagina / 105
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuration and utilities 56
For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or
the HP website (http://www.hp.com/support/smartstart/documentation).
Boot options
Near the end of the boot process, the boot options screen is displayed. This screen is visible for several
seconds before the system attempts to boot from a supported boot device. During this time, you can do the
following:
• Access RBSU by pressing the F9 key.
• Access the System Maintenance Menu (which enables you to launch ROM-based Diagnostics or
Inspect) by pressing the F10 key.
• Access the boot menu by pressing the F11 key.
• Force a PXE Network boot by pressing the F12 key.
BIOS Serial Console
BIOS Serial Console allows you to configure the serial port to view POST error messages and run RBSU
remotely through a serial connection to the server COM port. The server that you are remotely configuring
does not require a keyboard and mouse.
For more information about BIOS Serial Console, see the BIOS Serial Console User Guide on the
Documentation CD or the HP website (http://www.hp.com/support/smartstart/documentation).
Array Configuration Utility
ACU is a browser-based utility with the following features:
• Runs as a local application or remote service
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
• Suggests the optimum configuration for an unconfigured system
• Provides different operating modes, enabling faster configuration or greater control over the
configuration options
• Remains available any time that the server is on
• Displays on-screen tips for individual steps of a configuration procedure
• Beginning with ACU version 8.28.13.0, provides diagnostic functionality on the Diagnostics tab
(formerly known as Array Diagnostics Utility).
For optimum performance, the minimum display settings are 1024 × 768 resolution and 16-bit color. Servers
running Microsoft® operating systems require one of the following supported browsers:
• Internet Explorer 6.0 or later
• Mozilla Firefox 2.0 or later
For Linux servers, see the README.TXT file for additional browser and support information.
For more information about the controller and its features, see the HP Smart Array Controllers for HP ProLiant
Servers User Guide on the HP website (http://www.hp.com/support/SAC_UG_ProLiantServers_en). To
- HP ProLiant DL120 G7 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs 8
- Rear panel components 8
- Rear panel LEDs 9
- System board components 10
- System maintenance switch 11
- System board LEDs 11
- NMI functionality 12
- DIMM slot locations 12
- SAS and SATA drive LEDs 13
- BBWC module LEDs 14
- Fan locations 15
- T-10/T15 Torx screwdriver 16
- Operations 17
- Remove the access panel 18
- Install the access panel 18
- Remove the PCIe riser cage 18
- Install the PCIe riser cage 19
- Remove the air baffle 19
- Install the air baffle 20
- Operations 21 21
- Rack planning resources 22
- Optimum environment 22
- Temperature requirements 23
- Rack warnings 24
- Installing hardware options 25
- Setup 26 26
- Registering the server 27
- Introduction 28
- Memory options 28
- DIMM identification 29
- Memory configuration 30
- Installing a DIMM 30
- Drive options 31
- Removing a drive 32
- Optical drive option 33
- Expansion board option 36
- Storage controller option 37
- Remove the rear bracket 41
- Remove the ATX power supply 41
- Cabling 48
- Internal USB cabling 49
- BBWC battery cabling 50
- Optical drive cabling 51
- SATA cabling 51
- SAS cabling 52
- • SFF model 53
- Configuration and utilities 54
- Using RBSU 55
- Auto-configuration process 55
- Array Configuration Utility 56
- • Selecting the boot volume 57
- Management tools 58
- Diagnostic tools 59
- Integrated Management Log 60
- Keeping the system current 61
- ProLiant Support Packs 62
- Firmware 62
- HP Smart Update Manager 62
- Care Pack 63
- Troubleshooting 64
- Warnings and cautions 65
- Symptom information 66
- Loose connections 68
- Service notifications 68
- Server health LEDs 68
- Troubleshooting flowcharts 69
- General diagnosis flowchart 70
- Symptoms: 72
- Troubleshooting 74 74
- POST problems flowchart 75
- OS boot problems flowchart 77
- Troubleshooting 78 78
- • Redundancy failure 79
- (http://www.hp.com/support) 80
- Troubleshooting 81 81
- Battery 82
- FCC rating label 83
- Japanese class A notice 85
- BSMI notice 86
- Korean class A notice 86
- Chinese notice 86
- Laser compliance 86
- Battery replacement notice 87
- Electrostatic discharge 88
- Specifications 89
- Specification Value 90
- Support and other resources 91
- Customer Self Repair 93
- Reparo feito pelo cliente 95
- Acronyms and abbreviations 99
- Version Control Agent 101
- Documentation feedback 102
- Index 103 103
- Index 104 104
- Index 105 105
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant DL120 G7 Server
Hardware De La Computadora Hp Server Management Packs for Microsoft System Cente Manual de usuario
(86 paginas)
(86 paginas)
Hardware De La Computadora Hp Планшетный ПК HP EliteBook Revolve 810 G1 Manual de usuario
(113 paginas)
(113 paginas)
(88 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales