Hp ProLiant DL380p Gen8 Server Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 134
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
Hardware options installation 56
1.
Remove the drive blank.
2. Prepare the drive.
3. Install the drive.
4. Determine the status of the drive from the drive LED definitions ("Hot-plug drive LED definitions" on page
19).
Removing a hot-plug SAS or SATA hard drive
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Determine the status of the drive from the hot-plug SAS drive LED combinations ("Hot-plug drive LED
definitions" on page 19).
2. Back up all server data on the drive.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 133 134

Comentarios a estos manuales

Sin comentarios