Hp ProLiant DL380p Gen8 Server Manual de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 134
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
Cabling 93
12 drive LFF or 25 drive SFF
PCIe option
Depending on the server configuration, you may need to remove the primary PCI riser cage ("Remove
the PCI riser cage" on page 29) before cabling to a PCIe expansion board.
Chipset SATA cable option
With the chipset SATA cable option, the chipset SATA controller can be used with a single SATA hard drive
that is installed in one hard drive bay of the SFF or LFF hard drive cage.
When using the chipset SATA configuration, the following conditions apply:
o Only drive bay 5 is enabled. The remaining drive bays are disabled.
o The optical bay is disabled because the chipset SATA controller port on the system board is
redirected from the optical bay to the drive cage.
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 133 134

Comentarios a estos manuales

Sin comentarios