Hp ProLiant DL388e Gen8 Server Manual de usuario descargar pdf (Pagina 52)

Hardware options installation 52

Optical drive option

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

To install the component:

1. Power down the server (on page 19).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 19).

o Remove the server from the rack (on page 21).

4. Remove the optical drive blank.

Retain the blank for future use.

5. Remove the access panel (on page 22).

6. Remove the air baffle (on page 23).

7. Remove the primary PCI riser cage ("Remove the PCI riser cages" on page 24).

8. Install the optical drive into the bay.

9. Connect the optical drive cable to the optical drive.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 135 136

Sin comentarios

Hp ProLiant DL388e Gen8 Server Manual de usuario Pagina 52