HP Elite 8300 Series Small Form Factor Especificaciones Pagina 114

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 113
5. Remove the Torx T15 screw that secures the assembly to the front of the chassis.
6. Rotate the right side of the assembly away from the chassis.
Figure 6-30 Removing the front I/O, USB, power switch assembly
7. Pull the assembly toward the right and away from the chassis while threading the wires through
the slot between the drive cage and chassis front and the hole in the front of the chassis.
To reinstall the assembly, reverse the removal procedure.
NOTE: When reinstalling the cables, route the blue cable through the top hard drive cage slot and
route the green and yellow through the bottom hard drive cage slot.
Front I/O, USB Assembly 103
Vista de pagina 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 348 349

Comentarios a estos manuales

Sin comentarios