HP Elite 8300 Series Small Form Factor Especificaciones Pagina 181

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 180
4. Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on
the latch and rotating the latch to the open position.
Figure 8-7 Opening the Expansion Slot Retainer
5. Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE: Before removing an installed expansion card, disconnect any cables that may be
attached to the expansion card.
a. If you are installing an expansion card in a vacant socket, remove the appropriate
expansion slot cover on the back of the chassis. Pull the slot cover straight up then away
from the inside of the chassis.
Figure 8-8 Removing an Expansion Slot Cover
170 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Vista de pagina 180
1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 348 349

Comentarios a estos manuales

Sin comentarios