HP Elite 8300 Series Small Form Factor Especificaciones Pagina 121

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 120
6. Carefully lift the processor from the socket (3).
CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor’s solder connections.
Figure 6-36 Removing the processor
To install a new processor:
1. Place the processor in its socket and close the retainer. Make sure the slot in the processor fits
into the post on the socket.
110 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Vista de pagina 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 348 349

Comentarios a estos manuales

Sin comentarios