HP Elite 8300 Series Small Form Factor Especificaciones Pagina 250

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 249
b. Press the tab on right side of the panel (1), and then swing the right side of the cage away
from the chassis to remove it (2).
Figure 9-35 Removing the I/O panel
12. Remove the three remaining Torx T15 screws (1) that secure the system board to the chassis.
13. Slide system board toward the front of the unit until the rear connectors are clear of their slots in
the chassis (2).
14. Lift the rear of the system board until it clears the chassis, and then remove the system board
from the chassis (3).
Figure 9-36 Removing the system board
To install the system board, reverse the removal procedure.
NOTE: When replacing the system board, you must also change the chassis serial number in the
BIOS.
System Board 239
Vista de pagina 249
1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 348 349

Comentarios a estos manuales

Sin comentarios