HP B-series Embedded Switches Manual de usuario descargar pdf (Pagina 131)

The SAN Management Application

131Fabric OS Procedures Version 3.1.x/4.1.x User Guide

3. At the select prompt enter 3 to delete a member based on its Port/Node WWN.

4. At the prompt enter the WWN of the member you would like to delete from

the ACL. Press the Return key, and the main menu is displayed.

5. At the prompt enter 1 to verify the WWN you entered was deleted from the

ACL.

6. Once you have verified that the WWN was deleted correctly, enter 0 at the

prompt to end the session.

7. At the Update the FLASH? prompt enter Y.

8. Press Enter to update the flash and end the session.

Example:

switch:admin> msconfigure

0 Done

1 Display the access list

2 Add member based on its Port/Node WWN

3 Delete member based on its Port/Node WWN

select : (0..3) [1] 2

Port/Node WWN (in hex): [00:00:00:00:00:00:00:00]

*WWN is successfully added to the MS ACL.

0 Done

1 Display the access list

2 Add member based on its Port/Node WWN

3 Delete member based on its Port/Node WWN

select : (0..3) [2] 1

<< Continued on next page.>>

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 269 270

Sin comentarios

HP B-series Embedded Switches Manual de usuario Pagina 131