
Basic Switch Management
55Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Example:
Restoring the System Configuration Settings
System Configurations can be saved through the Fabric OS, or through Fabric
Manager. To back up or restore system configuration settings through Fabric
Manager, refer to the HP StorageWorks Fabric Manager Version 3.0.x User
Guide.
To restore the system configuration settings from a backup:
1. Verify that the FTP service is running on the host workstation.
2. Log into the switch as the admin user.
3. Shut down the switch by entering the switchdisable command.
4. Enter the configdownload command at the command line. The command
becomes interactive and you are prompted for the required information.
5. At the Do you want to continue [y/n] prompt, select “y”.
Example:
switch:admin> configupload
Server Name or IP Address [host]: 192.168.15.42
User Name [user]: johndoe
File Name [config.txt]: config-switch.txt
Password:xxxxx
configuration complete
switch:admin>
switch:admin> configdownload
Server Name or IP Address [host]: 192.168.15.42
User Name [user]: johndoe
File Name [config.txt]: config-switch.txt
Password:
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
Comentarios a estos manuales