HP Proliant ML350 Generation 3 Guía de usuario descargar pdf (Pagina 17)

Operations 17

WARNING: To reduce the risk of personal injury or equipment damage, be sure that the

rack is adequately stabilized before extending a component from the rack.

WARNING: To reduce the risk of personal injury, be careful when pressing the server

rail-release latches and sliding the server into the rack. The sliding rails could pinch your

fingers.

3. After performing the installation or maintenance procedure, press the rail-release latches and slide

the server back into the rack.

Access the server rear panel (rack model)

If the procedure requires accessing the server rear panel, unlock the cable management arm and swing

the arm away from the server. For information on unlocking the cable management arm, refer to the

installation instructions that ship with the 3-7U Quick Deploy Rail System.

Open or remove the tower bezel

This server has a removable bezel that must be unlocked and opened before accessing the front panel

components. The bezel should be kept closed during normal server operations.

Use the key provided with the server to unlock the bezel with a clockwise turn.

If necessary, remove the bezel.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 105 106

Sin comentarios

HP Proliant ML350 Generation 3 Guía de usuario Pagina 17