HP SuperStack 3 Load Balancer Appliance Manual de usuario descargar pdf (Pagina 24)

24 CHAPTER 3: SETTING UP FOR MANAGEMENT

Methods of

Managing the

Server Load

Balancer

You can manage a Server Load Balancer using one of the following

methods:

■ Web interface management — Each Server Load Balancer has a set of

internal Web pages that allow you to manage the Server Load

Balancer using a Web browser. Using the Web interface is the

preferred method of management.

■ Command line interface management — The Server Load Balancer

offers limited command line interface (CLI) commands to configure

basic parameters, such as the management IP Address.

■ SNMP management — You can manage a Server Load Balancer using

any Network Manager running the Simple Network Management

Protocol (SNMP), such as 3Com Network Supervisor software. SNMP

management is limited and does not allow for full configuration

functionality.

Assigning an IP

Address

To manage a Server Load Balancer over the network, the Server Load

Balancer must be initially configured with the following:

■ An IP address and subnet mask

■ A default route

The CLI provides a series of online instructions that you need to complete

the setup process.

To assign an IP address to the Server Load Balancer, complete the

following steps:

1 Connect your management station to the console port on the front the

Server Load Balancer. See “Console Port Cable” on page 84.

2 On a Windows® PC, you may use the Hyperterminal program or other

terminal emulator. The correct settings are:

■ Bits per second: 9600

■ Data bits: 8

■ Parity: None

■ Stop bits: 1

■ Flow control: Hardware

slb_gsg.bk Page 24 Thursday, May 31, 2001 8:57 AM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 98 99

Sin comentarios

HP SuperStack 3 Load Balancer Appliance Manual de usuario Pagina 24