HP SuperStack 3 Load Balancer Appliance Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
56 CHAPTER 7: CONFIGURING CACHE REDIRECTION
Redundant
Configuration
The following steps describe how to create a cache subnet if you are
configured for redundant server load balancing.
The cache subnet cannot be in the same subnet as the server.
To create a cache subnet, complete the following steps:
1 Click Logical View on the Toolbar.
2 From the Navigation tree, select System > Setup > Cache Subnets.
3 Click Add. The first wizard page appears.
4 Click Next. The Cache Subnet - Configure Address page appears.
5 Enter 192.168.3.200 in the Device A IP Address field.
6 Enter 192.168.3.100 in the Device B IP Address field.
7 Enter 255.255.255.0 in the Subnet Mask field.
8 Click Next. The Cache Subnet - Device A Floating Address page appears.
9 Complete the entry in the Device A Floating Address field. This is the
floating default gateway IP address. For example, 192.168.3.150.
Do not forget to change the default gateway on your caches to this IP
address.
10 Click Next.
11 Click Finish. Your cache subnet has been added.
slb_gsg.bk Page 56 Thursday, May 31, 2001 8:57 AM
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 98 99

Comentarios a estos manuales

Sin comentarios