HP 5300 Información técnica descargar pdf (Pagina 114)

100

101

Interface Access, System Information, and Friendly Port Names

Interface Access: Console/Serial Link, Web, and Inbound Telnet

Outbound Telnet to Another Device. This feature operates indepen-

dently of the telnet-server status and enables you to Telnet to another device

that has an IP address.

Syntax: telnet < ip-address >

For example:

HPswitch # telnet 10.28.27.204

Reconfigure Web Browser Access. In the default configuration, web

browser access is enabled.

Syntax: [no] web-management

To disable web browser access:

HPswitch(config)# no web-management

To re-enable web browser access:

HPswitch(config)# web-management

Reconfigure the Console/Serial Link Settings. You can reconfigure one

or more console parameters with one console command.

Syntax: console

[terminal < vt100 | ansi >]

[screen-refresh < 1 | 3 | 5 | 10 | 20 | 30 | 45 | 60 >]

[baud-rate

< speed-sense | 1200 | 2400 | 4800 | 9600 | 19200 |38400 | 57600 >]

[ flow-control < xon/xoff | none >]

[inactivity-timer < 0 | 1 | 5 | 10 | 15 | 20 | 30 | 60 |120 >]

[events <none | all | non-info | critical | debug]

Note If you change the Baud Rate or Flow Control settings for the switch, you

should make the corresponding changes in your console access device. Oth-

erwise, you may lose connectivity between the switch and your terminal

emulator due to differences between the terminal and switch settings for these

two parameters.

All console parameter changes except events require that you save the config-

uration with write memory and then execute boot before the new console

configuration will take effect.

7-6

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 441 442

Comentarios a estos manuales

Sin comentarios

HP 5300 Información técnica Pagina 114

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP 5300