HP 5300 Información técnica descargar pdf (Pagina 254)

100

101

Port Traffic Controls

Rate-Limiting

Displaying the Current Rate-Limit Configuration

This command displays the per-port rate-limit configuration in the running-

config file.

Syntax: show rate-limit [ port-list ]

Without [ port-list ], this command lists the rate-limit

configuration for all ports on the switch. With [ port-list ], this

command lists the rate-limit configuration for the specified

port(s). This command operates the same way in any CLI

context.

For example, if you wanted to view the rate-limiting configuration on the first

five ports in the module in slot “A”:

Ports A3-A5 are configured with a rate

limit of 60 %. (Ports A1 and A2 are not

configured for rate-limiting.)

Figure 13-3. Example of Listing the Rate-Limit Configuration

The show config command lists the per-port rate-limiting and Guaranteed

Minimum Bandwidth configuration in the startup-config file. (Note that con-

figuration changes performed with the CLI, but not followed by a write mem

command do not appear in the startup-config file.)

13-12

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 441 442

Comentarios a estos manuales

Sin comentarios

HP 5300 Información técnica Pagina 254

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP 5300