HP 5300 Información técnica Pagina 295

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 442
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 294
Configuring for Network Management Applications
CDP
Viewing the Switch’s Current CDP Configuration
Syntax: show cdp
Lists the switch’s global and per-port CDP configura
tion.
This example shows the default CDP configuration.
CDP Enable/Disable on the Switch
Packet Hold Time in CDP Neighbors Table
Interval for Transmitting Outbound
CDP Packets on All Ports
Per-Port CDP Enable/Disable
Figure 14-14. Example of Show CDP with the Default CDP Configuration
Viewing the Switch’s Current CDP Neighbors Table
Devices are listed by the port on which they were detected.
Syntax: show cdp neighbors
Lists the neighboring CDP devices the switch detects,
with a subset of the information collected from the
device’s CDP packet. (For more on this topic, refer to
table 14-3, “CDP Neighbors Data” on page 14-38.)
[detail]
Provides a longer list of details on all of the CDP-aware
device the switch detects.
[[e] port-numb]
Lists the details for the CDP-aware device con
nected to the specified port. (Allows only one port
at a time.)
(For more on this topic, see “CDP Neighbor Data and MIB Objects” on page
14-37.)
14-31
Vista de pagina 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 441 442

Comentarios a estos manuales

Sin comentarios