HP 5300 Información técnica Pagina 228

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 442
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 227
Port Trunking
CLI: Viewing and Configuring Port Trunk Groups
“Up” Links
Standby Link
Figure 12-9. Example of a Dynamic LACP Trunk with One Standby Link
Using the CLI To Configure a Static or Dynamic Trunk
Group
Important Configure port trunking before you connect the trunked links between
switches. Otherwise, a broadcast storm could occur. (If you need to connect
the ports before configuring them for trunking, you can temporarily disable
the ports until the trunk is configured. See
“Using the CLI To Configure Ports”
on page 10-8.)
On the Series 5300XL Switches you can configure up to 36 port trunk groups
(depending on the number of ports available in the switch and the number of
links in each trunk). An individual trunk can have up to eight links, with
additional standby links if you’re using LACP. You can configure trunk group
types as follows:
Trunk Type Trunk Group Membership
TrkX (Static) DynX (Dynamic)
LACP Yes Yes
Trunk Yes No
FEC Yes No
The following examples show how to create different types of trunk groups.
12-14
Vista de pagina 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 441 442

Comentarios a estos manuales

Sin comentarios