Hp ESL E-series Tape Libraries Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
2
1
1
Picker
assembly
2
Vertical motor
Figure 4 Library robotics
The vertical and horizontal m otors move the library robotics into position to pick and place tape
cartridges, and rotate the assembly 180˚ to allow the library robotics to pass cartridges between the
side storage bins a nd the back storage bins or tape drives. The extension axis assembly is on top
of the large robotics tray. It extends and retracts the library robotics to remove and insert the tape
cartridges into bins and drives.
The library robotics includes the optical scanner that reads bar code labels (7 characters for Super Digital
Linear Tape (SDLT) and 8 characters for Ultrium). The scanner is used to m aintain an inventory of the tape
cartridges within the library. A full inventory occurs automatically whenever the library is powered on or
when the doors h ave been opened. An inventory of just the load p orts occurs when the load po rts have
been opene d. Inventories can also be initiated from the host computer.
Although the library d oes not require tape car tridges to have bar code labels, properly labeled tape
cartridges and full storage bins speed up the inventory process and greatly improve media management.
NOTE:
If you have more than 100 unlabeled tape cartridges, your library will hang during inventory or when
you power on the library. When this happens, Going on line displays in the OCP.
HP StorageWorks
17
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 140 141

Comentarios a estos manuales

Sin comentarios