Hp ESL E-series Tape Libraries Manual de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
SDLT tape cartridges. A column can hold 2 removable magazines. Removable magazines c an be used
in the rst column of the left load port, and the rst two columns of the right load port.
Insert removable magazines
To use the remo
vable magazines to load tape cartridges:
1. Prepare the ta
pe cartridges by af xing a bar code label and write-protecting or write-enabling e ach
cartridge as desired. See Inserting tape cartridges.
2. Load the tape cartridges into the removable magazine(s), using the same media type of tape
cartridges and removable magazines (SDLT cartridges in an SDLT magazine; LTO cartridges in an
LTO magazin
e). A removable magazine is labeled with its med ia t ype (see Figure 50).
1
2
1
Removable magazine
2
Media t
ype label
Figure50Identifytheremovablemagazinemediatype
3. From the OCP, open the appropriate load port (right or left).
CAUTION:
Ensurethattheloadportdoorisopensothatthedoorsclipisnotdamagedwhenthe
load p
ort ejects.
a. From the Status screen, press Ports.
b. Use the Up and Down buttons to highlight the load por t to open, then press Select.
c. When the curser highlights Open,pressSe lect.
The display will show a note reminding you to open the load port door. If you have not
opened the load port d oor, do so now.
d. Press OK to continue.
4. With the load port open, place the loaded removable magazine in the library.
a. Place the base of the removable m agazine into an empty location on the panel (see
Figure 51).
b. Push the top of the removable magazine against the panel until it snaps into plac e.
HP StorageWorks
71
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 140 141

Comentarios a estos manuales

Sin comentarios