Hp StorageWorks 1510i Modular Smart Array Manual de usuario descargar pdf (Pagina 35)

add route

Description Adds a static route to a controller. This command is generally used for

debugging purposes.

NOTE:

There is one routing table per controller.

Syntax add route <ctlr><ip[/<mask>]|default><gateway>

Operands <ctlr>

The controller that the route is for. Valid values are “A” or “B”.

<ip[/<mask>]|default>

The IP address in dotted notation. If default is entered instead of an IP

address, the default gateway will be used.

If a subnet mask is included with the ip address, it must be entered in

dotted notation or number of bits, and must be entered directly after the IP

address, separated with a slash (/) character (no spaces).

The default gateway for the network.

Example

CLI> add route A 10.10.10.10 10.10.10.140

The route was added successfully.

Sin comentarios

Hp StorageWorks 1510i Modular Smart Array Manual de usuario Pagina 35