Hp StorageWorks 2405 Disk System Manual de usuario descargar pdf (Pagina 126)

126 Removal and Replacement

Midplane (HP-Qualified Only)

The midplane board is replaceable by HP-qualified personnel only.

Replace the midplane based on troubleshooting results (see “Isolating Causes” in

chapter 4). Disks, LCCs, and power supply/fan modules connect to the midplane.

The power must be OFF and the top cover removed in order to remove and

replace the midplane board.

Caution Turning off a disk system isolates the enclosed disks from the host.

Perform recommended system administration to prevent loss of

pending I/Os to the disks.

Tools

■ Small flat-blade screwdriver

■ Torx T25 screwdriver

■ Torx T15 screwdriver

■ Torx T10 screwdriver

■ ESD strap

Procedure

1 Remove the top cover. See page 124.

2 Put on your ESD strap and attach the free end to the disk system.

Caution Static discharge can destroy functional components on the

midplane.

3 To remove the midplane:

a Loosen the cam handle locking screws and pull power supplies free of the

midplane (see page 120).

b Loosen the cam handle locking screws and pull the LCCs free of the

midplane.

c Remove the disk modules from the chassis.

d Remove the light pipes (see Figure 63 on page 128).

e Remove the power switch extender arm.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 143 144

Sin comentarios

Hp StorageWorks 2405 Disk System Manual de usuario Pagina 126