Hp StorageWorks 2405 Disk System Manual de usuario descargar pdf (Pagina 127)

Removal and Replacement 127

Removal and Replacement

f Remove the eight Torx T15 screws along the top and bottom edges of the

midplane (see Figure 63).

g Pull the midplane forward to clear alignment pins and lift it up and out of

the disk system.

4 To replace the midplane:

a Stand the new midplane inside the chassis and push it over the alignment

pins. Connectors automatically align with floating fan connectors inside

the chassis.

b Insert and tighten eight screws into the midplane and chassis.

c Replace the light pipes.

d Replace the power switch extender arm.

5 Replace the top cover. See page 124.

6 Reseat and secure the LCCs (see page 117).

7 Reseat and secure the power supplies (see page 120).

8 Reinstall the disk modules.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 143 144

Sin comentarios

Hp StorageWorks 2405 Disk System Manual de usuario Pagina 127