Hp ProLiant DL360p Gen8 Server Manual de usuario descargar pdf (Pagina 10)

Component identification 10

• 10 SFF

Item Description Status

UID button/LED Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or

firmware upgrade in progress

Off = Deactivated

Power On/Standby button

and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present*

Health LED Solid green = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault**

NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has

occurred, or the power button cable is disconnected.

**To identify components in a degraded or critical state, see the Systems Insight Display LEDs (on page 15), check

iLO/BIOS logs, and reference the server troubleshooting guide.

Rear panel components

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 117 118

Sin comentarios

Hp ProLiant DL360p Gen8 Server Manual de usuario Pagina 10