Hp ProLiant DL360p Gen8 Server Manual de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Hardware options installation 68
8.
Insert the power supply into the power supply bay until it clicks into place.
9. Route the power cord. Use best practices when routing power cords and other cables. A cable
management arm is available to help with routing. To obtain a cable management arm, contact an HP
authorized reseller.
10. Make sure the 48V DC power source is off or the PDU breaker is in the off position, and then connect
the power cord to the 48V DC power source or PDU.
11. Turn on the 48V power source or switch the PDU breaker to the on position to supply 48V to the power
supply.
12. Be sure that the green power supply LED is on.
Rack bezel option
Install the 1U rack bezel into the chassis, and then lock the 1U rack bezel with the key.
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 117 118

Comentarios a estos manuales

Sin comentarios