Hp ProLiant DL360p Gen8 Server Manual de usuario descargar pdf (Pagina 25)

Operations 25

The server may look different than the one shown in the following illustration, depending on the server

model.

Install the PCI riser cage

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser cage.

1. Power down the server (on page 20).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Extend the server from the rack (on page 20).

4. Remove the access panel (on page 23).

5. Align the PCI riser boards with the corresponding connectors on the system board, and then install the

cage.

6. Push down on the thumbscrew and rotate 180 degrees.

7. Lower the tab.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 117 118

Sin comentarios

Hp ProLiant DL360p Gen8 Server Manual de usuario Pagina 25