Hp ProLiant DL385 G7 Server Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Component identification 12
Installing the risers listed in the table above in either the primary or secondary riser connectors
determines the form factor of the PCI cards supported by those risers.
FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.
The PCIe2 x16 riser supports a maximum power of 225W with an HP power cable. This cable must
be used for PCIe card wattages greater than 75W.
System board components
Item Description
1 Processor 2 memory sockets
2 Front I/O connector
3 USB tape connector*
4 SATA optical drive connector
5 USB connector
6 Power supply backplane connector
7 System maintenance switch
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 110 111

Comentarios a estos manuales

Sin comentarios