Hp ProLiant ML350 G4 Server Manual de usuario descargar pdf (Pagina 55)

Hardware Options Installation 55

SCSI Hard Drive Guidelines

When adding SCSI hard drives to the server, observe the following general

guidelines:

•

A maximum of six SCSI devices per channel can be added.

Each SCSI drive must have a unique ID. The system automatically sets all

SCSI IDs on hot-plug models.

The SCSI ID for each hot-plug hard drive is set automatically to the next

sequential ID number in a series beginning with ID0.

If only one SCSI hard drive is used, install it in the bay with the lowest

number.

Hot-plug SCSI hard drives must be Ultra320. Mixing these types with other

drive standards degrades the overall performance of the drive subsystem.

Installing Hot-Plug SCSI Hard Drives

1. Remove the existing hard drive blank or hard drive from the drive bay.

2. Install the hard drive.

NOTE: Depending on model purchased, the server may look slightly

different than shown.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 155 156

Sin comentarios

Hp ProLiant ML350 G4 Server Manual de usuario Pagina 55