Hp ProLiant ML350 G4 Server Manual de usuario descargar pdf (Pagina 62)

62 HP ProLiant ML350 Generation 4p Server User Guide

11. Connect the data cable into a SCSI controller channel (secondary SCSI

channel shown).

12. Replace the front bezel ("Removing the Front Bezel (Tower Model)" on page

), if applicable.

13. Replace the access panel ("Removing Access Panel" on page 27

Installing a Tape Drive Option

1. Power down the server ("Powering Down the Server" on page 25).

2. Extend the server from the rack, if applicable ("Extending the Server from

the Rack" on page 26

3. Remove the front bezel door, if necessary ("Removing the Front Bezel

(Tower Model)" on page 27

4. Remove the access panel ("Removing Access Panel" on page 27

5. Install the guide screws ("Identifying Guide Screws" on page 58

), if

applicable.

6. Configure the device by setting the SCSI ID. The SCSI ID on each device

must be manually set to a unique value. Refer to the documentation provided

with the device for instructions on setting the SCSI ID.

7. Install the drive into the drive bay until it clicks into place.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 155 156

Sin comentarios

Hp ProLiant ML350 G4 Server Manual de usuario Pagina 62