Hp ProLiant ML350 G4 Server Manual de usuario descargar pdf (Pagina 89)

Server Cabling 89

NOTE: Both SCSI channels are self-terminating. If you choose to not

use one or both of the SCSI channels, you do not need to terminate the

unused channel(s).

Cabling SCSI Devices in the Removable Media Area

The following steps detail the procedure for cabling an integrated SCSI controller

to a removable media or other device:

1. Install removable media device ("Installing a Half-Height or Full-Height

Media Device Option" on page 60

). Be sure that the SCSI ID is uniquely set

on each device.

2. Locate the SCSI cable that is shipped with the option. For more information

on cables, refer to the HP website

(http://www.hp.com/servers/proliantml350

3. Install the next available connector to the device.

SATA or SAS Cabling

Many configurations are possible when SATA or SAS controllers are added.

When upgrading your storage controller, refer to the Quickspecs and the cabling

matrix to identify the correct cables

(http://www.hp.com/products/servers/proliantml350/

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 155 156

Sin comentarios

Hp ProLiant ML350 G4 Server Manual de usuario Pagina 89