Hp ProLiant ML350 G4 Server Manual de usuario descargar pdf (Pagina 63)

Hardware Options Installation 63

IMPORTANT: HP recommends installing the tape drive on a separate

SCSI cable to avoid a decrease in performance on other SCSI devices.

8. Connect the data and power cables to the back of the device.

9. Connect the data cable into a SCSI controller channel (secondary SCSI

channel shown).

10. Replace the front bezel ("Removing the Front Bezel (Tower Model)" on page

), if applicable.

11. Replace the access panel ("Removing Access Panel" on page 27

Installing an Internal Two-Bay Hot-Plug SCSI Drive Cage Option

You can install up to two half-height or one full-height removable media device

in the removable media cage. To install a half-height or full-height media device:

1. Extend the server from the rack, if applicable ("Extending the Server from

the Rack" on page 26

2. Remove the front bezel door, if necessary ("Removing the Front Bezel

(Tower Model)" on page 27

3. Remove the access panel ("Removing Access Panel" on page 27

4. Access the removable media cage ("Accessing the Removable Media Cage"

on page 58

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 155 156

Sin comentarios

Hp ProLiant ML350 G4 Server Manual de usuario Pagina 63