Hp ProLiant ML570 G4 Server Manual de usuario Pagina 71
- Pagina / 125
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Hardware options installation 71
b.
Install six 6-32 Torx T-15 screws (three per side) into the corresponding holes on the rack bezel.
8. Install the server into the rack ("Installing the server into the rack" on page 34).
Rack-to-tower conversion
The rack-to-tower conversion kit includes all equipment required to convert the rack model server into a
tower model server.
The rack-to-tower conversion kit includes:
• Tower bezel
• Casters (4)
• Tower bezel retention clips (2)
• Caster screws [8-32 Torx T-15 (12)]
• Tower cover screws [6-32 x 1/4 Torx T-15 (2)]
• Painted access panel
In addition to the items supplied in the conversion kit, use the Torx T-15 screwdriver ("Rear panel
components" on page 9).
Before proceeding with the rack-to-tower conversion:
1. Power down the server (on page 23).
2. Disconnect the power supply cables ("Redundant hot-plug power supply option" on page 62).
3. Disconnect all external cables from the server rear panel ("Rear panel components" on page 9).
4. Remove all cables from the cable management arm.
5. Remove all power supplies from the server (to decrease the weight) ("Redundant hot-plug power
supply option" on page 62).
6. Remove all hard drives from the server (to decrease the weight) ("Removing a hot-plug SAS hard
drive" on page 56).
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Rear panel components 9
- Rear panel LEDs and buttons 10
- System board components 11
- System maintenance switches 12
- NMI switch 13
- LED illuminates amber 14
- SAS and SATA device numbers 15
- SAS and SATA hard drive LEDs 16
- DIMM slots 20
- Hot-plug power supply LEDs 20
- Hot-plug fans 21
- Hot-plug fan LEDs 22
- Operations 23
- Operations 24 24
- Operations 25 25
- 2. Open the bezel 25
- Remove the rack bezel 26
- Remove the access panel 27
- Install the access panel 27
- Rack planning resources 29
- Optimum environment 29
- Temperature requirements 30
- Power requirements 30
- Rack warnings and cautions 31
- Installing hardware options 32
- Setting up a tower server 33
- Setup 36 36
- Registering the server 37
- Processor option 38
- Memory options 43
- Single- and Dual-rank DIMMs 44
- Advanced ECC Memory 44
- Online spare memory 45
- Hot-plug mirrored memory 46
- Memory boards and DIMMs 47
- Configuring the memory 53
- ROM-based diagnostics 54
- Selecting the AMP mode 54
- Prepare the hard drive 55
- Drive options 57
- Removable media devices 58
- Redundant hot-plug fans 63
- Replacing hot-plug fans 64
- Expansion board options 65
- Installing expansion boards 66
- Tower-to-rack conversion 67
- Removing the casters 68
- Removing the tower cover 69
- Installing the rack bezel 69
- Rack-to-tower conversion 71
- Removing the server rails 73
- Installing the tower cover 73
- Installing the casters 74
- Installing the tower bezel 74
- Cabling 76
- SAS cabling 77
- Video connector cabling 77
- Cabling 78 78
- Configuration tools 79
- HP ROM-Based Setup Utility 80
- Array Configuration Utility 81
- Management tools 82
- Management Agents 83
- Redundant ROM support 83
- USB support 83
- HP Systems Insight Manager 83
- Diagnostic tools 84
- Keeping the system current 85
- Care Pack 86
- Troubleshooting 87
- Symbols on equipment 88
- Warnings and cautions 88
- Symptom information 89
- Loose connections 90
- Service notifications 90
- Troubleshooting flowcharts 91
- General diagnosis flowchart 92
- Symptoms: 94
- Troubleshooting 96 96
- POST problems flowchart 97
- OS boot problems flowchart 98
- Troubleshooting 100 100
- Possible causes: 101
- Redundancy failure 101
- Troubleshooting 102 102
- Electrostatic discharge 103
- In this section 104
- FCC rating label 104
- FCC logo, United States only 105
- Modifications 106
- Japanese notice 107
- BSMI notice 107
- Korean notice 108
- Laser compliance 108
- Battery replacement notice 108
- Specifications 110
- Technical support 112
- Customer self repair 113
- Customer Self Repair 114
- Technical support 115 115
- Reparo feito pelo cliente 116
- Technical support 117 117
- Technical support 118 118
- Technical support 119 119
- Acronyms and abbreviations 120
- Version Control Agent 122
- Wake-on LAN 122
- Index 123 123
- Index 124 124
- Index 125 125
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant ML570 G4 Server
(109 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales