HP 2000CP 2500CP Manual de usuario Pagina 107

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 106
Service Tests
4-21
HP DesignJet CP Series Printers
In this case, try one of the following:
1 Check that the Window Sensor is seated correctly.
2 Check that the cable for the Window Sensor is connected correctly.
3 Replace the Window Sensor ' page 8-21.
Right Door Sensor Failure
If there is a problem with the Right Door Sensor then the following message
will appear:
D “D0802 Fail” - Right Door Sensor failed.
In this case, try one of the following:
1 Check that the Right Door Sensor is seated correctly.
2 Check that the cable for the Right Door Sensor is connected correctly.
3 Replace the Right Door Sensor ' page 8-21.
Left Door Sensor Failure
If there is a problem with the Left Door Sensor then the following message
will appear:
D “D0803 Fail” - Left Cover Sensor failed.
In this case, try one of the following:
1 Check that the Left Door Sensor is seated correctly.
2 Check that the cable for the Left Door Sensor is connected correctly.
3 Replace the Left Door Sensor ' page 8-18.
Refill Valve Sensors Failure
If there is a problem with the Refill Valve Sensors then one of the following
messages will appear:
D “D0804 Fail” - Black Refill Valve Sensor failed.
D “D0805 Fail” - Magenta Refill Valve Sensor failed.
D “D0806 Fail” - Cyan Refill Valve Sensor failed.
D “D0807 Fail” - Yellow Refill Valve Sensor failed.
The test is continued on the next page.
Vista de pagina 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 347 348

Comentarios a estos manuales

Sin comentarios