HP 2000CP 2500CP Manual de usuario descargar pdf (Pagina 257)

100

101

8-36 Removal and Installation

HP DesignJet CP Series Printers

Trailing Cable

Refer to figure 12  page 8-38

Removal



Switch off the printer and remove the power cord.

1. Remove the following:

1. Electronics Module  page 8-6.

2. Window and Top Cover  page 8-15

3. Right Hand Cover  page 8-21

2. Manually slide the carriage assembly to the center of the printer.

3. Carefully disconnect the trailing cable (item 1) from connectors on the

carriage PCA.

4. Remove the trailing cable from the trailing cable carriage clamp (item 2).

5. Remove the trailing cable from the trailing cable holder (item 3).

6. Pull the trailing cable through a hole in the Y-axis assembly (item 4).

7. Pull the trailing cable through a hole in the electronics support frame

(item 5).

8. Remove the trailing cable from the 3 cable clamps at the rear of the

printer (item 6).

9. Disconnect the trailing cable from the following positions in the

electronics module:

1. J3 MISC

2. J5 DATA

3. J10 SUPPLY

10.Remove the trailing cable by pulling it through the ferrite (item 7) at the

rear of the printer.

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 347 348

Comentarios a estos manuales

Sin comentarios

HP 2000CP 2500CP Manual de usuario Pagina 257

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP 2000CP 2500CP