HP 2000CP 2500CP Manual de usuario descargar pdf (Pagina 64)

100

101

System Error Codes

2-29

HP DesignJet CP Series Printers

System Error: 060000

Problem Description: The Line Sensor is not functioning properly because

there is too much ambient light.

Corrective Action: Try the following:

D Close the Window if it is open.

D Move the printer to a location with less light.

The Printer MUST be kept away from direct

intense sunlight or a spotlight.

D Replace the Trailing Cable ' Page 8-36.

D Replace the Carriage Assembly ' Page 8-42.

D Replace the Electronics Module ' page 8-6.

Only replace one component at a time and

check if the error has gone before

replacing another component. Using this

procedure you will be able to determine

exactly which component failed.

System Error: 060100

Problem Description: Incorrect Line Sensor type in the EEROM.

Corrective Action: Try the following:

D Calibrate the Line Sensor ' page 5-10.

D Clear the EEROM ' page 4-32 and perform all

the calibrations again.

D Replace the Electronics Module ' page 8-6 and

perform all the calibrations again.

System Error: 060200

Problem Description: Incompatible Firmware and Carriage PCA.

Corrective Action: Upgrade the Firmware.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 347 348

Comentarios a estos manuales

Sin comentarios

HP 2000CP 2500CP Manual de usuario Pagina 64

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP 2000CP 2500CP